Radial Turbine Gas Meter

Product Details:

• Principle of velocity measurement
• For measurements requiring obligatory verification (for MID versions)
• Dimensions DN 80 and 100
• Meter element can be calibrated without monopipe fitting
• Counting device is in a gas-free space
• Low starting value
• High measurement stability and operational security due to high-quality, wear-resistant components
• Self-lubricating ball bearings
• Pressure extraction connection inside the meter
• Designed for simple servicing (measurement-cartridge principle)
• LF-pulse generator (standard)
• Standard integrated flow strainer
• Short straight inlet lengths (2 × DN)

• Over-run brake: Mechanical over-run brake without measuring range for intermitting operation
• Temperature sensor pockets in monopipe fitting

• - 2nd LF-IPG, 1x can be retrofitted without breaking the verification seal
• - MF-IPG

• Mounting /dismounting of the meter element possible without disconnecting the monopipe fitting
• The monopipe fitting remaining in the pipe network enables mounting /dismounting of the meter element without tension from the pipe network
• Can be installed in any position from horizontal to vertical (turbine axis not suspended and roller counter axis always horizontal)

• Developed and produced according to Quality Standard ISO 9001:2008
• International / national type approvals MID TCM 143/13-5110
• Type Examination Certificate FTZÚ 15 ATEX 0172X
• Marking of equipment Ex II -/2G IIB T4

• Rs 1,00,000 to 12,00,000 per unit 

Product Details:

EQZK Radial Turbine Gas Meter for measuring of biogas, sewage gas, landfill gas, ethylene and etc.

Options

• Pulse generator:
• - 2nd LF-IPG, 1x can be retrofitted without breaking the verification seal
• - MF-IPG

Mounting and maintenance

• Mounting/dismounting of the meter element possible without disconnecting the monopipe fitting
• The monopipe fitting remaining in the pipe network enables mounting/dismounting of the meter element without tension from the pipe network
• Can be installed in any position from horizontal to vertical (turbine axis not suspended and roller counter axis always horizontal)

• Developed and produced according to Quality Standard ISO 9001:2008
• Type Examination Certificate FTZÚ 15 ATEX 0172X
• Marking of equipment Ex II -/2G IIB T4

• All components of the special version designed for bio and sewer gas have a surface treatment, so-called passive corrosion protection (surface treated monopipe adaptors available on request).
• For the operation of EQZK with sewage gas, we cannot grant any warranty of durability as the chemical condition of the gas has an important influence on the working life of the meter.

• Sulfurated hydrogen
• Humidity
• Dirt
• The dew point of gas lead often to an unknown aggressiveness of the gas
• Ammonia in the sewer gas attack all nonferrous metals. Therefore, all surfaces of meter parts in contact with the biogas are PTFE-coated (Teflon).

• Rs 1,00,000 to 12,00,000 per unit 

Product Details:

• Pressure Rate:-PN 100, ANSI 600
• Removable meter cartridge
• No straight inlet/outlet sections required for EMT-Lx, 1 x DN straight inlet section required for EMT-S
• Self-lubricated bearings (up to DN200) or oil pump (standard from DN250)
• Multipurpose exchangeable index
• Special meters on request
• Seals according EN 549 (seals for gas appliances and gas equipment)

• Compliant with EN12261:2002
• Compliant with EN12261:A1-2006
• Compliant with OIML R137 1&2 (2014)
• Compliant with MID 2014/32/EU

• Sensors compliant with Ex ia IIC T4 ... T6 Gb (-40°C ≤ Ta +70°C)
• Encoder compliant with Ex ib IIB T3 ... T6 Gb (-25°C ≤ Ta +55°C)

• Compliant to Pressure Equipment Directive 2014/68/EU

• Rs 1,00,000 to 12,00,000 per unit 

Product Details:

• Principle of velocity measurement
• For measurements requiring obligatory verification
• Dimensions DN 50, 80 and 100
• Meter element can be calibrated without monopipe fitting
• Counting device is in a gas-free space
• Low starting value
• High measurement stability and operational security due to high-quality, wear-resistant components
• Self-lubricating ball bearings
• Pressure extraction connection inside the meter
• Designed for simple servicing (measurement-cartridge principle)
• LF-pulse generator (standard)
• Standard integrated flow strainer
• Short straight inlet lengths (2 × DN)

• Over-run brake: Mechanical over-run brake without measuring range for intermitting operation
• Temperature sensor pockets in monopipe fitting

• - 2nd LF-IPG, 1x can be retrofitted without breaking the verification seal
• - MF-IPG

• Mounting and maintenance
• Mounting /dismounting of the meter element possible without disconnecting the monopipe fitting
• The monopipe fitting remaining in the pipe network enables mounting /dismounting of the meter element without tension from the pipe network
• Can be installed in any position from horizontal to vertical (turbine axis not suspended and roller counter axis always horizontal)

• Developed and produced according to Quality Standard ISO 9001:2008
• Type Examination Certificate FTZÚ 15 ATEX 0172X
• Marking of equipment Ex II -/2G IIB T4

• Rs 1,00,000 to 12,00,000 per unit