Our range of products include f65 gas pressure regulator, r series gas pressure regulator, gas pressure regulator - f80 series, series gas pressure regulator - f100, ss pressure regulator and medium pressure controller frm-noc.
F Series Gas Pressure Regulator balancing membrane designed, diaphragm-controlled, spring-loaded regulators; Suitable for low and medium pressures. "F" series regulators are equipped with external sensing lines and can be designed as internal sensing according to customer request. A special regulator design combined with a balancing mechanism gives us
Features:-
High flow rate permeability
High precision even at maximum flow
0 leakage even when there is no flow
Accelerated reflexes
Provides the results of maintenance and repair without disconnecting from the pipeline.
Other Details:-
Direct drive Gas Pressure Regulators, Combined with Safety Shut Off Valve, are manufactured in accordance with 2014/68 / EU directives and EN 334: 2019 and EN 14382: 2019 standards.
Cast Spheroidal Graphite Iron EN GJS 500-7 (GGG50)
Series
R Series
Inlet Pressure Range
0.2 bar
BP Model
10 mbar
Outlet Pressure Range Wd MP Model
80 mbar
AP Model
300 mbar
Operating Temperature
-20 to +60 Degree C
Ambient Temperature
-30 to +60 Degree C
Accuracy And lock-up Pressure (AC-SG)
up to AC5 / up to SG10 BP Model AC5, SG20 - MP-AP Model AC5, SG10
R Series Gas Pressure Regulators diaphragm-controlled, spring-loaded regulators; Suitable for low and medium pressures. "R" series regulators are equipped with internal sensing lines and can be produced with external sensing according to customer request. A special regulator design combined with a diaphragm mechanism gives us.
Features:-
High flow rate permeability
High precision even at maximum flow
0 leakage even when there is no flow
Accelerated reflexes
Provides the results of maintenance and repair without disconnecting from the pipeline
Other Details:
Direct drive Gas Pressure Regulators can be in the Same Body with Safety Close Valve, manufactured in accordance with 2014/68 / EU directives and EN 334: 2019 / EN 14382: 2019 standards.
up to AC5 / up to SG10 BP Model AC5, SG20 - MP-AP Model AC5, SG10
Series
F Series
Surface Finish
Color Coated
BP Model
1 kPa
Outlet Pressure Range Wd MP Model
8 kPa
AP Model
30 kPa
F80 Series Gas Pressure regulators are widely used for Natural Gas applicatio for DRS (District Pressure Regulator System) and MRS (Metering Receiving Station) for pressure regulations. These regulators are highly acccurate for pressure and flow contron along with world classs performance for the GASTECH prodcuts
Direct acting pressure controller without inlet pressure balancing with adjustable setpoint spring and modularly attachable safety shut-off valve (SAV).
For systems that require rapid response to changes in flows (industrial gas burners and gasburning appliances). Suitable for gases of gas families 1, 2, 3 and other neutral gaseous media.
